GLD4000/11/S Belt Coal Feeder

Detailed description of the GLD4000/11/S belt coal feeder

The GLD series belt feeder is a new type of coal feeding equipment developed for the large flow rate of large-scale, high-yield, and high-efficiency mine production systems, and the current feeder can no longer meet the requirements of coal mine production. This product is based on the K-type reciprocating feeder, and the reciprocating motion mechanism is changed to a conveyor belt mechanism so that the feeding motion changes from sliding friction to rolling friction. The coefficient of friction is significantly reduced, resulting in a significant reduction in power consumption. The feeding method is changed from intermittent feeding to continuous feeding, and the feeding amount is dynamic and continuously variable, so that the feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection.

Technical parameters of the GLD4000/11/S belt coal feeder

Specifications and models：GLD4000/11/S

Power kW: 11

Voltage v: 380~660

Adaptation to the environment: Explosion-proof type

Maximum feed volume t/h：4000

The maximum belt speed is 1:50 m/s

Dimensions mm：4052×1622×2338

Weight kg: 5500

Physical drawing of the GLD4000/11/S belt coal feeder

National unified sales hotline: 400-086-0616

GLD4000/11/B Belt Coal Feeder

Overview of the GLD4000/11/B belt coal feeder

The GLD4000/11/B belt coal feeder is a new type of coal feeding equipment developed for the large flow rate of large-scale, high-yield, and high-efficiency mine production systems, and the current feeder can no longer meet the requirements of coal mine production. This product is based on the K-type reciprocating feeder, and the reciprocating motion mechanism is changed to a conveyor belt mechanism so that the feeding motion changes from sliding friction to rolling friction. The coefficient of friction is significantly reduced, resulting in a significant reduction in power consumption. The feeding method is changed from intermittent feeding to continuous feeding, and the feeding amount is dynamic and continuously variable, so that the feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection.

Main features of the GLD4000/11/B belt coal feeder

1. Large feeding capacity, small size, light weight, easy transport, and installation underground can greatly reduce the amount of shaft engineering;

2. The feeding volume can be adjusted in a large range, and the adjustment is convenient (stepless speed regulation);

3. The working resistance of the moving part is small, the power consumption is low, and the working life of the moving part is long;

4. Smooth operation, low noise, environmental protection;

5. The parts are versatile and easy to install and maintain.

Technical parameters of the GLD4000/11/B belt coal feeder

Specifications and models: GLD4000/11/B

Power kW: 11

Voltage v: 380~660

Adaptation to the environment: Explosion-proof type

Maximum feed volume t/h: 4000

Maximum belt speed m/s: 1.50

Dimensions mm：4052×1622×2338

Weight kg: 5500

Installation instructions of the GLD4000/11/B belt coal feeder

The feeder can be installed separately or as a whole. When the split is installed, the funnel frame is installed at the mouth of the coal bunker first, then the box is installed, and then other components such as the base frame are installed.

During the overall installation, the funnel frame is installed at the mouth of the coal bunker, and then all the other components are assembled, and the overall hoisting and connection section are connected with bolts.

Physical drawing of the GLD4000/11/B belt coal feeder

National unified sales hotline: 400-086-0616

GLD3300/7.5/S Belt Coal Feeder

Detailed description of the GLD3300/7.5/S belt coal feeder

The GLD3300/7.5/B belt coal feeder is a new type of coal feeding equipment developed for the large flow rate of large-scale, high-yield, and high-efficiency mine production systems, and the current feeder can no longer meet the requirements of coal mine production. This product is based on the K-type reciprocating feeder, and the reciprocating motion mechanism is changed to a conveyor belt mechanism so that the feeding motion changes from sliding friction to rolling friction. The coefficient of friction is significantly reduced, resulting in a significant reduction in power consumption. The feeding method is changed from intermittent feeding to continuous feeding, and the feeding amount is dynamic and continuously variable, so that the feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection.

Main features of the GLD3300/7.5/S belt coal feeder

1. Large feeding capacity, small size, light weight, easy transport, and installation underground can greatly reduce the amount of shaft engineering;

2. The feeding volume can be adjusted in a large range, and the adjustment is convenient (stepless speed regulation);

3. The working resistance of the moving part is small, the power consumption is low, and the working life of the moving part is long.

4. Smooth operation, low noise, environmental protection;

5. The parts are versatile and easy to install and maintain.

Technical parameters of the GLD3300/7.5/S belt coal feeder

Specifications and models：GLD3300/7.5/S

Power kW: 7.5

Voltage v: 380~660

Adaptation to the environment: Explosion-proof type

Maximum feed volume t/h：3300

Maximum belt speed m/s: 0.98

Dimensions mm ：3683×1605×1868

Weight kg: 5000

Installation and maintenance of the GLD3300/7.5/S Belt coal feeder

The feeder can be installed separately or as a whole.

When the split is installed, the funnel frame is installed at the mouth of the coal bunker first, then the box is installed, and then other components such as the base frame are installed.

During the overall installation, the funnel frame is installed at the mouth of the coal bunker, and then all the other components are assembled, and the overall hoisting and connection section are connected with bolts.

Physical drawing of the GLD3300/7.5/S belt coal feeder

National unified sales hotline: 400-086-0616

GLD3300/7.5/B Belt Coal Feeder

Introduction to GLD3300/7.5/B belt coal feeder

The GLD3300/7.5/B belt coal feeder is a new type of coal feeding equipment developed for the large flow rate of large-scale, high-yield, and high-efficiency mine production systems, and the current feeder can no longer meet the requirements of coal mine production. This product is based on the K-type reciprocating feeder, and the reciprocating motion mechanism is changed to a conveyor belt mechanism so that the feeding motion changes from sliding friction to rolling friction. The coefficient of friction is significantly reduced, resulting in a significant reduction in power consumption. The feeding method is changed from intermittent feeding to continuous feeding, and the feeding amount is dynamic and continuously variable, so that the feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection.

Main features of the GLD3300/7.5/B belt coal feeder

1. Large feeding capacity, small size, light weight, easy transport, and installation underground can greatly reduce the amount of shaft engineering;

2. The feeding amount can be adjusted in a large range, and the adjustment is convenient (stepless speed regulation);

3. The working resistance of the moving part is small, the power consumption is low, and the working life of the moving part is long;

4. Smooth operation, low noise, environmental protection;

5. The parts are versatile and easy to install and maintain.

Technical parameters of the GLD3300/7.5/B belt coal feeder

Specifications and models: GLD3300/7.5/B

Power kW: 7.5

Voltage v: 380~660

Adaptation to the environment: Explosion-proof type

Maximum feed volume t/h：3300

Maximum belt speed m/s: 0.98

Dimensions mm： 3683×1605×1868

Weight kg: 5000

Test and operation of the GLD3300/7.5/B belt coal feeder

After the feeder is installed in place, the motor is started no-load to make the feeder run no-load. If everything is normal, check and tighten the relevant bolts and nuts again, and slowly open the coal bunker so that the coal flow enters the feeder from small to large, so that the feeder can be put into normal operation.

Physical drawing of the GLD3300/7.5/B belt coal feeder

National unified sales hotline: 400-086-0616

GLD2200/7.5/S Belt Coal Feeder

Introduction to GLD2200/7.5/S belt coal feeder

The GLD2200/7.5/S belt coal feeder is a new type of coal feeding equipment developed for the large flow rate of large-scale, high-yield, and high-efficiency mine production systems, and the current feeder can no longer meet the requirements of coal mine production. This product is based on the K-type reciprocating feeder, and the reciprocating motion mechanism is changed to a conveyor belt mechanism so that the feeding motion changes from sliding friction to rolling friction. The coefficient of friction is significantly reduced, resulting in a significant reduction in power consumption. The feeding method is changed from intermittent feeding to continuous feeding, and the feeding amount is dynamic and continuously variable, so that the feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection.

Technical parameters of the GLD2200/7.5/S belt coal feeder

Specifications and models：GLD2200/7.5/S

Power kW: 7.5

Voltage v: 380~660

Adaptable to the environment Explosion-proof type

Maximum feed volume t/h：2200

Maximum belt speed m/s: 0.98

Dimensions mm ：3683×1605×1868

Weight kg: 4100

Main wearing parts of the GLD2200/7.5/S belt coal feeder

1. Driving roller 2. Reversing roller 3. Transmission chain 4. Heavy-duty buffer roller 5. Coal scraper 6. Wear-resistant flame-retardant tape 7. Cleaner 8. Driving device 9. Lower roller.

Physical drawing of the GLD2200/7.5/S belt coal feeder

National unified sales hotline: 400-086-0616

GLD2200/7.5/B Belt Coal Feeder

Detailed description of the GLD2200/7.5/B belt coal feeder

The GLD2200/7.5/B belt coal feeder is a new type of coal feeding equipment developed for the large flow rate of large-scale, high-yield, and high-efficiency mine production systems, and the current feeder can no longer meet the requirements of coal mine production. This product is based on the K-type reciprocating feeder, and the reciprocating motion mechanism is changed to a conveyor belt mechanism so that the feeding motion changes from sliding friction to rolling friction. The coefficient of friction is significantly reduced, resulting in a significant reduction in power consumption. The feeding method is changed from intermittent feeding to continuous feeding, and the feeding amount is dynamic and continuously variable, so that the feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection.

Main features of the GLD2200/7.5/B belt coal feeder

1. Large feeding capacity, small size, light weight, easy transport, and installation underground can greatly reduce the amount of shaft engineering;

2. The feeding amount can be adjusted in a large range, and the adjustment is convenient (stepless speed regulation);

3. The working resistance of the moving part is small, the power consumption is low, and the working life of the moving part is long;

4. Smooth operation, low noise, environmental protection;

5. The parts are versatile and easy to install and maintain.

Technical parameters of the GLD2200/7.5/B belt coal feeder

Specifications and models: GLD2200/7.5/B

Power kW: 7.5

Voltage v: 380~660

Adaptation to the environment: Explosion-proof type

Maximum feed volume t/h：2200

Maximum belt speed m/s: 0.98

Dimensions mm: 3683×1605×1868

Weight kg: 4100

Physical drawing of the GLD2200/7.5/B belt coal feeder

National unified sales hotline: 400-086-0616

GLD1500/7.5/S Belt Coal Feeder

Introduction to GLD1500/7.5/S belt coal feeder

The GLD1500/7.5/S belt coal feeder is a new type of coal feeding equipment developed for the large flow rate of large-scale, high-yield, and high-efficiency mine production systems, and the current feeder can no longer meet the requirements of coal mine production. This product is based on the K-type reciprocating feeder, and the reciprocating motion mechanism is changed to a conveyor belt mechanism so that the feeding motion changes from sliding friction to rolling friction. The coefficient of friction is significantly reduced, resulting in a significant reduction in power consumption. The feeding method is changed from intermittent feeding to continuous feeding, and the feeding amount is dynamic and continuously variable, so that the feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection.

Main features of GLD1500/7.5/S belt coal feeder

1. Large feeding capacity, small size, light weight, easy transport, and installation underground can greatly reduce the amount of shaft engineering;

2. The feeding amount can be adjusted in a large range, and the adjustment is convenient (stepless speed regulation);

3. The working resistance of the moving part is small, the power consumption is low, and the working life of the moving part is long;

4. Smooth operation, low noise, environmental protection;

5. The parts are versatile and easy to install and maintain.

Technical parameters of GLD1500/5.5/S belt coal feeder

Specifications and models: GLD1500/5.5/S

Power kW: 7.5

Voltage v: 380660

Adaptation to the environment: Explosion-proof type

Maximum feed volume t/h: 1500

Maximum belt speed m/s: 0.75

Dimensions mm: 4052×1622×2338

Weight kg: 4000

Physical drawing of the GLD1500/7.5/S belt coal feeder

National unified sales hotline: 400-086-0616

GLD1500/7.5/B belt coal feeder

Introduction to GLD1500/7.5/B belt coal feeder

The GLD1500/7.5/B belt coal feeder is a new type of coal feeding equipment developed for the large flow rate of large-scale, high-yield, and high-efficiency mine production systems, and the current feeder can no longer meet the requirements of coal mine production. This product is based on the K-type reciprocating feeder, and the reciprocating motion mechanism is changed to a conveyor belt mechanism so that the feeding motion changes from sliding friction to rolling friction. The coefficient of friction is significantly reduced, resulting in a significant reduction in power consumption. The feeding method is changed from intermittent feeding to continuous feeding, and the feeding amount is dynamic and continuously variable, so that the feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection.

Installation and maintenance of the GLD1500/7.5/B belt coal feeder

The feeder can be installed separately or as a whole. When the split is installed, the funnel frame is installed at the mouth of the coal bunker first, then the box is installed, and then other components such as the base frame are installed. During the overall installation, the funnel frame is installed at the mouth of the coal bunker, and then all the other components are assembled, and the overall hoisting and connection section are connected with bolts.

Technical parameters of the GLD1500/5.5/B belt coal feeder

Specifications and models：GLD1500/5.5/B

Power kW: 7.5

Voltage v: 380~660

Adaptation to the environment: Explosion-proof type

Maximum feed volume t/h：1500

Maximum belt speed m/s: 0.75

Dimensions mm ：4052×1622×2338

Weight kg: 4000

Physical drawing of the GLD1500/7.5/B belt coal feeder

National unified sales hotline: 400-086-0616

GLD800/5.5/S Belt Coal Feeder

Detailed description of the GLD800/5.5/S belt coal feeder

The GLD800/5.5/S belt coal feeder is a new type of coal feeding equipment developed for the large flow rate of large-scale, high-yield, and high-efficiency mine production systems, and the current feeder can no longer meet the requirements of coal mine production. This product is based on the K-type reciprocating feeder, and the reciprocating motion mechanism is changed to a conveyor belt mechanism so that the feeding motion changes from sliding friction to rolling friction. The coefficient of friction is significantly reduced, resulting in a significant reduction in power consumption. The feeding method is changed from intermittent feeding to continuous feeding, and the feeding amount is dynamic and continuously variable, so that the feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection.

Technical parameters of the GLD800/5.5/S belt coal feeder

Specifications and models: GLD800/5.5/S

Power kW: 5.5

Voltage v: 380~660

Adaptation to the environment: Explosion-proof type

Maximum feeding capacity t/h: 800

Maximum belt speed m/s: 0.75

Dimensions mm:3280×1420×1718

Weight kg: 3500

Installation and maintenance of the GLD800/5.5/S belt coal feeder

The feeder can be installed separately or as a whole. When the split is installed, the funnel frame is installed at the mouth of the coal bunker first, then the box is installed, and then other components such as the base frame are installed. During the overall installation, the funnel frame is installed at the mouth of the coal bunker, and then all the other components are assembled, and the overall hoisting and connection section are connected with bolts.

Physical drawing of the GLD800/5.5/S belt coal feeder

National unified sales hotline: 400-086-0616

GLD800/5.5/B Belt Coal Feeder

Main features of the GLD800/5.5/B belt coal feeder

1. Large feeding capacity, small size, light weight, easy transport, and installation underground can greatly reduce the amount of shaft engineering;

2. The feeding volume can be adjusted in a large range, and the adjustment is convenient (stepless speed regulation);

3. The working resistance of the moving part is small, the power consumption is low, and the working life of the moving part is long;

4. Smooth operation, low noise, environmental protection;

5. The parts are versatile and easy to install and maintain.

Technical parameters of the GLD800/5.5/B belt coal feeder

Specifications and models: GLD800/5.5/B

Power kW: 5.5

Voltage v: 380~660

Adaptation to the environment: Explosion-proof type

The maximum feeding capacity is t/h800

Maximum belt speed m/s: 0.75

Dimensions mm:3280×1420×1718

Weight kg: 3500

Test and operation of the GLD800/5.5/B belt coal feeder

After the feeder is installed in place, the motor is started no-load to make the feeder run no-load. If everything is normal, check and tighten the relevant bolts and nuts again, and slowly open the coal bunker so that the coal flow enters the feeder from small to large, so that the feeder can be put into normal operation.

Physical drawing of the GLD800/5.5/B belt coal feeder

National unified sales hotline: 400-086-0616

Belt Type Coal Feeder

Main features of the belt type coal feeder

1. Large feeding capacity, small size, light weight, easy transport, and installation underground can greatly reduce the amount of shaft engineering;

2. The feeding volume can be adjusted in a large range, and the adjustment is convenient (stepless speed regulation);

3. The working resistance of the moving part is small, the power consumption is low, and the working life of the moving part is long;

4. Smooth operation, low noise, environmental protection;

5. The parts are versatile and easy to install and maintain.

Test run and operation of the belt type coal feeder

After the belt feeder is installed in place, the motor is started at no-load to make the feeder run no-load. If everything is normal, check and tighten the relevant bolts and nuts again, and slowly open the coal bunker so that the coal flow enters the feeder from small to large, so that the feeder can be put into normal operation.

National unified sales hotline: 400-086-0616

Belt Coal Feeder

Introduction to belt coal feeder

The belt coal machine is a kind of coal feeding machinery in thermal power plants that is mainly composed of coal pipes, belts, rollers, and fan-shaped baffles. At present, most of the power plants that use dumpers to unload coal use belt coal machines.

Working principle of the belt coal feeder

The coal feeding of the belt coal feeder relies on the friction of the coal between the belt and the coal hopper, and the coal is given to the coal receiving equipment so as to realize the work of the belt on the coal machine. Because the friction effect needs to be generated, the belt speed of the belt coal feeder should not be too high; otherwise, relative slippage between the belt and the coal is easy to occur, which may lead to the failure to feed coal.

Structure of the belt coal feeder

The belt coal feeder consists of a conveyor belt, a drive device (motor, reducer, coupling, hydraulic force, brake, backstop, electric drum, reversing rolling, roller, cleaner, guide trough, frame, tensioning device, and funnel). safety protection device and other components.

Advantages of the belt coal feeder

1. Low belt speed, stable operation, silence, and low noise.

2. The coal feeding is continuous and uniform; the center distance between the head and tail drums is small; the coal feeding distance is long; the output range is large; it can be moved; and the maintenance is convenient.

3. Energy-saving and environmental protection; low energy consumption.

4. The belt feeder is dynamically adjusted, has stepless speed regulation, and is easy to adjust.

5. The belt feeder has little wear, small maintenance, and a long service life.

6. The belt feeder has a simple structure, a reasonable design, and convenient maintenance.

7. With a wide range of uses, the belt feeder can replace other types of existing feeders.

Operation and maintenance of the belt coal feeder

1. Ensure that there is no maintenance or staff next to the coal machine on the belt and that there is no debris on the belt.

2. Check and confirm that the interfaces of the belt conveyor are good and that there is no layering, scratching, or tearing.

3. Check and confirm that each roller is complete and that there is no deflection of the spiral tensioning device.

4. Check and confirm that there is no coal accumulation on the head and tail rollers and the second layer belt, and that the tail drum guardrail is firm and complete.

5. Check and confirm that the motor is well wired and grounded and that the wheel cover is complete and firm. There is no loosening of anchor bolts.

6. Check and confirm that the oil level of the reducer is normal and the oil quality is qualified.

7. According to the operation mode, check and confirm that the baffle of the coal pipe is correct and tight.

GLD Belt Coal Feeder

Product introduction to GLD belt coal feeder

The GLD belt coal feeder, also called feeder and feeder, is a GLD series belt coal feeder widely used in coal, metallurgy, electric power, and other industries of various coal bunkers. For the continuous coal feeding mode, the user in production can be adjusted (manual adjustment or hydraulic cylinder adjustment) without stopping the machine according to the need, so that the coal feeding system can better meet the requirements of high efficiency, energy savings, and environmental protection. It is the replacement product of the reciprocating coal feeder and the vibrating coal feeder.

In addition to the GLD series standard belt coal feeder, our company also produces non-standard, extended belt coal feeders.

Structural characteristics of the GLD belt coal feeder

1. Small operating power, low energy consumption, and good economy;

2. The amount of coal feed is large and stable;

3. Dynamic adjustment, stepless speed regulation, easy adjustment;

4. Stable operation, low noise, environmental protection;

5. Small wear and tear, small maintenance, and long service life;

6. Strong versatility of parts and components; easy installation and maintenance;

7. It can replace the existing types of coal feeders.

Technical parameters of the GLD belt coal feeder

Note: The feeder can be customized according to the requirements of the provided bin size, belt size and material, reducer, drum, chain size, and other accessories.

Installation instructions of the GLD belt coal feeder

The coal feeder can be installed separately on site or as a whole. When the split is installed, the funnel frame is installed at the mouth of the coal bunker first, then the box is installed, and then other components such as the base frame are installed.

During the overall installation, the funnel frame is installed at the mouth of the coal bunker, and then all the other components are assembled, and the overall hoisting and connection section are connected with bolts.

Physical drawing of the GLD belt coal feeder

GLD Belt Coal Machine

Introduction to GLD belt coal machine

The GLD belt coal feeder, also called feeder and feeder, GLD series belt coal feeder, widely used in coal, metallurgy, electric power, and other industries of various coal bunkers for the rotation of continuous coal feeding, the production of users according to the need to not stop the adjustment (manual adjustment or hydraulic cylinder adjustment), so that the coal feeding system can better meet the requirements of high efficiency, energy saving, and environmental protection, is a reciprocating coal feeder and vibrating coal feeder replacement product.

In addition to the GLD series standard belt coal feeder, our company also produces non-standard, extended belt coal feeders.

Structural characteristics of the GLD belt coal machine

1. Small operating power, low energy consumption, and good economy;

2. The amount of coal feed is large and stable;

3. Dynamic adjustment, stepless speed regulation, easy adjustment;

4. Stable operation, low noise, environmental protection;

5. Small wear and tear, small maintenance, and long service life;

6. Strong versatility of parts and components; easy installation and maintenance;

7. It can replace the existing types of coal feeders.

Technical parameters of the GLD belt coal machine

Note: The feeder can be customized according to the requirements of the provided bin size, belt size and material, reducer, drum, chain size, and other accessories.

Physical drawing of the GLD belt coal machine