‌KBA12C Mining Intrinsically Safe Dust Collecting Camera

1. Overview

Compact structure, small volume, light weight, easy to install, installation angle adjustable, anti-vibration, moisture-proof, is a special monitoring equipment for mining face, windward coal drop, coal bunker, coal yard and other high dust concentration, strong vibration environment. It can be used in coal mines where there is a danger of gas and coal dust explosion.

2. Features

(1). The lens and fill light window are equipped with dust removal brush to remove dust, and can be operated remotely through the monitoring system;

(2). Border detection, intrusion detection and other alarm modes can be set, and there is 1 channel alarm contact signal output;

(3). With two-way voice intercom function, can be turned on and off through the monitoring system.

3. Main technical parameters

(1). Rated voltage: DC12V, working current: ≤1.2A;

(2). Minimum illumination 0.05Lux, automatic replenishment;

(3). Ethernet electrical interface 3-way, transmission rate 100Mbps, transmission distance 100m;

(4). Fiber optic interface 2 ways, transmission rate 100Mbps, transmission distance 10km, can be long-distance cascade transmission;

KBA12J Mining Intrinsically Safe Alarm Camera

1. Overview

This camera is compact, easy to install, the installation angle is freely adjustable, shock-resistant, moisture-proof, is a dedicated to high-risk areas, access control places, safety hazards occasions in the monitoring equipment, alarm triggered, the speaker voice prompts, the light flashes a warning to convey early warning information. It can be used in coal mines with gas and coal dust explosion danger. 

2. Features

(1). With sound and light alarm function, speaker voice announcement, light flashing;

(2). Border detection, intrusion detection and other alarm modes can be set, and there is 1 channel alarm contact signal output;

(3). With two-way voice intercom function, can be opened and closed through the monitoring system.

3. Main technical parameters

(1). Rated voltage: DC12V, working current: ≤1.2A;

(2). Minimum illumination 0.05Lux, automatic replenishment;

(3). Ethernet electrical interface 3-way, transmission rate 100Mbps, transmission distance 100m;

(4). Fiber optic interface 2 ways, transmission rate 100Mbps, transmission distance 10km, can be long distance cascade transmission;